How to operate Recycling Crusher

How to operate Recycling Crusher

1. Carefully check whether the power cord of the equipment is damaged or not, and whether the grounding device is in good condition to prevent electric shock accidents.

2. Open the knife chamber and the scrap bin to check whether there are residual plastics and other foreign objects. If there are foreign objects, they should be cleaned up in time.

3. Close the scrap bin and tighten the fixing screws.

4. Turn on the power supply, start the equipment, and carefully check whether there is any abnormal sound in the operation of the audio-visual equipment.

5. After confirming that the equipment is running normally, put in the materials to be crushed.

6. The feeding should be uniform, and the plastic crusher should avoid the blocking phenomenon of the large material input. Once the blocking occurs, it should be stopped immediately to eliminate it. When driving, pay attention to the motor load current display meter to ensure that the plastic crusher motor is not overloaded.

7. When the equipment is running, it is strictly forbidden to put your hand into the crusher for operation to avoid injury.

8. It is strictly forbidden to put hard objects and the like into the crusher to cause damage to the blade.